STUDENT PROGRAMME

 

Conference On

Indian Medical Devices & Plastics Disposables Industry 2015

January 9-10, 2015, Ahmedabad Management Association, Ahmedabad

Tentative Programme Schedule

Theme: Indian Medical Device Industry: Balancing Innovation, Quality And Compliance Enabling “Make In India”

Focus Area For Two Days

  • Medical Polymers & Processings

  • Medical Textiles & Other Materials

  • Device Manufacturing

  • Quality Assurance & Certification

  • Market Trends & Analysis

  • Technology & Regulations

  • Research & Development

  • Packaging & Sterilization

Day - I   January 9 - 10, 2015

Time: 9.00 AM to 6.00 PM

09:00 - 09:30 Registration and Welcome Drinks
09:30 - 11:15 Guest Of Honour
 
  • Address: Shri H.G. Koshia, Commissioner, Food & Drug Control Administration, Gujarat

  • Address: Dr. S. Eswara Reddy, Deputy Drugs Controller Of India, Central Drugs Standard Control Organisation, Ministry of Health & Family Welfare, Govt. of India, Ahmedabad

  • New Opportunities For Indian Industry", Address By: Mr. Himanshu Baid, Managing Director, Poly Medicure Ltd., Co- Chairman of CII Medical Technology Group and Co – Chairman of PHD Chamber Health committee, Faridabad

  • “PLASTINDIA 2015: Expanding Horizons” Address By: Mr. Mahendra Patel, Chairman, National Advisory Board, PLASTINDIA Foundation & Chairman, Mamata Group, Ahmedabad.

  • “Recent Developments Facilitating Growth Of Exports By Indian Medical Device Industry” Address By: Mr. B. Sarkar, Executive Director & Secretary, EEPC INDIA, Mumbai

  • Key Note Address: "Indian Medical Device Industry: Balancing Innovation, Quality And Compliance Enabling “Make In India”, Mr. C. Padmakumar, Chairman & Managing Director, Terumo Penpol Limited, Trivandrum

  • Summing Up and Vote Of Thanks: Mr. Kishore Khanna, Managing Director, Romsons Group of Industries, Agra, India

11:15 - 11:45 Comfort Tea & Visit To Technology Display Show 2015
11:45 - 13:15 Session I : Theme: Indian Medical Device Industry: Balancing Innovation, Quality And Compliance Enabling “Make In India”.
  Theme Presentations Followed By Panel Discussion
  Session Chairman & Moderator : Mr. Himanshu Baid, Managing Director, Poly Medicure Ltd., Co- Chairman of CII Medical Technology Group and Co – Chairman of PHD Chamber Health committee, Faridabad
 

Expert Presentations:

13:15 - 14:15 Lunch & Visit To Technology Display Show 2015
14:15 - 15:45

Session II : Theme : Medical Device Industry : New Developments & Technologies

 

Session Chairman : Mr. Kishore Khanna, Managing Director, Romsons Group of Industries, Agra, India

  Speakers/ Experts:
15:45 - 16:15

Session III : Panel Discussion On: Accelerating Manufacturing Competitiveness Through Productivity & Value Additions

16:15 - 17:00 Moderator : Dr. Alok Ray - Prof. & Head, Center for Biomedical Engg, IIT & AIIMS, Delhi
  Panel Experts:
17:00 - 18:00 - Meeting Of “Association for Indian Medical Device Industry (AIMED) “Members.
  • Mr. Kishore Khanna, Managing Director, Romsons Group of Industries, Agra, India

  • Mr. H. Vijay Kumar, CEO - SIDD Life Sciences Pvt. Ltd., T. N & Jt. Co-ordinator – Medical Disposables Vertical Product Segment (HWG) - AIMED, Maraimalai Nagar

 

TECHNOLOGY DISPLAY SHOW 2015 EXHIBITION
An Exhibition Displaying Materials , Adhesives , New Technologies , Manufacturing / Testing Equipments , Packaging / Sterilization Equipments And Supplies For Medical Device Industry

 

Day - II   January 10, 2015

Time: 9.00 AM to 4.00 PM

 

Track I : Time: 9.00 AM to 1:30 PM

09:00 - 09:30

Registration and Welcome Drink

09:30 - 11:40

Session I : Theme: Medical Disposables & Implants: Production, Processes & Technology 1

  Session Chairman : Mr. Ravi Shrivastava, CEO, Omni Lens Pvt. Ltd., Ahmedabad

11:40 - 12:20

COMFORT TEA & VISIT TO TECHNOLOGY DISPLAY SHOW 2015

12:20 - 13:55

Session II : Theme: Medical Disposables & Implants: Production, Processes & Technology 2

 

Session Chairman : Mr. Christopher Sullivan, President of North America, Xponent Global and Marco Polo Products, Grafton, USA

Expert Presentations:
13:55 - 15:00 Lunch & Visit To Technology Display Show 2015
15:00 - 16:30 Session III: Theme: Medical Disposables & Implants: Production, Processes & Technology 3
  Session Chairman & Moderator : Mr. Ravi Shrivastava, CEO, Omni Lens Pvt. Ltd., Ahmedabad
  Expert Presentation:
  • “Success Stories Of Exports To Europe By Indian Medical Device Companies & Question - Answers” : Dr. Leendart Santema, General Manager, Consultancy Bureau Santema, The Netherlands

 

Panel Discussion On : Effective Medical Device Marketing In India & Abroad : My Experiences

  Panel Experts :
  • Dr. Leendart Santema, General Manager, Consultancy Bureau Santema, The Netherlands

  • Mr. Jayesh Shah, Managing Director - Kensure Healthcare Pvt. Ltd., Ahmedabad

  • Dr. Paresh Shah, Managing Director, Shaily Endoscopy, Baroda

  • Mr. J. P. Dutta, CEO, Lancer Medical Technology Ltd., Ahmedabad

  • Mr. Vipul Sheth, Managing Director, Matrix Med Tec Pvt. Ltd., Ahmedabad

  • Mr. Deepak Dave, Vice President, Medical Surgical And Healthcare Industries Trade Association and CEO, Ashutosh International, Mumbai

 


Track II : Tea 11:30 AM ; Part - I : 12:00 Noon to 1:30 PM; Lunch : 1:30 PM to 2:30 PM ; Part - II 2:30 PM to 4:30 PM

Biocompatibility (ISO 10993) Training, January 10, 2015 at Ahmedabad, India

The Biocompatibility Workshop will be conducted by GLR Laboratories Pvt Ltd, Chennai is conducting a one day for the benefit of medical devices manufacturers.

Biocompatibility testing (ISO10993) is not just a box ticking exercise, but a crucial part of the risk management process (ISO 14971) and ensures the safety of medical devices. Biological Evaluation of Medical Devices is often not well understood and typically falls upon QA Manager to comply with its requirements. This hands-on training course will help participants understand biocompatibility requirements for their medical devices and develop approaches to go about testing their products. It should be noted that not all testing are required to determine the biological safety of medical devices. Depending on the nature of the materials and combinations, a literature review and report may be the only justification required to save cost and time on performing unnecessary testing. This course will help you decide if testing is appropriate, and help with researching to generate data for justifications to support a biologically safe device. Attendance certificate will be provided at the end of the training.

Interested participants please register with Conference Secretariat, mpds00@vsnl.com / dlpandya@gmail.com with cc to info@glrlabs.com (or +91-9841212596) as soon as possible to enable us to arrange training materials and certificates.

Who should attend

1. QA managers in medical device manufacturers
2. Regulatory affair personnel
3. Senior management
4. Design engineers

Course outcome

1. Good understanding of ISO 10993
2. Understanding of required Biocompatibility tests
3. How to plan and undertake a biological evaluation of a medical device
4. When to perform the test, and when not to test
5. How to interpret and understand results


Track III : Time: 2:00 PM to 4:00 PM

“Conference On Safety And Risk Management For Healthcare Professionals”.

(Target Delegates: Doctors, Healthcare Workers/Nurses, Hospital Administrators).

During the course of carrying out their duties Doctors, Nurses and other healthcare professionals are exposed to many risks associated with use of medical devices. There are chances of health hazards related to use of needles and syringes, risk hazards related to unsafe sterilization practices, risk hazards related to improper handling of biomedical wastes and, healthcare - associated infections due to mishandling of medical devices and many such specified and unspecified risks.

The conference will highlight various important issues related to safety & risk management against such risks.

Faculty: Inauguration by Dr. S. Eswara Reddy, Deputy Drugs Controller Of India, Central Drugs Standard Control Organisation, Ministry of Health & Family Welfare, Govt. of India, Ahmedabad

"Safe Employees… Safer Hospital…" : Dr. Mahesh Patel, Quality & Patient Safety Officer, Apollo Hospitals International Ltd.,

“Managing Risks To Make The Hospitals Safer - For Healthcare Professionals” : Major (Dr) Sanjay Dalsania, Chief Quality Officer,Apollo Hospitals International Ltd, Ahmedabad

“Don’t become the Patient” - Healthcare professionals The Way Forward, Mr. Sumit Marwah, CEO & Director, Dispoline India Private Limited & Dispoline Healthcare Private Limited

“Safety and Risk Management Involved in ETO Sterilization & Effects of ETO on Environment And Their Solutions”: Mr. Sanjeev Rajput- Founder of BALAJI CONCEPTS (one of the leading manufacturer of ETO Sterilizers for Hospitals), Vadodara.

(More experts to be announced shortly).


Track - IV - Student Programme

FOCUS: CAREER OPPORTUNITIES FOR BIOMEDICAL ENGINEERS

Session Chairman: Mr. Harshit Thakkar, Project Manager, DEKRA Certification B.V., USA

  • “Medical Device Design And Development”: Dr. Jugal Parekh, Director, JJD Innovations, Vapi

  • Mr. Pankaj Dhole, Director, Bioteknika Healthcare Pvt. Ltd., Ahmedabad

  • “Career Opportunities For Clinical Research”: Dr. Ashok Thakkar, Senior Manager - Clinical Research & Medical Writing, Sahajanand Medical Technologies Pvt. Ltd., Surat

         COMFORT TEA & VISIT TO TECHNOLOGY DISPLAY SHOW 2015

         Address by Dignitaries

  • Mr. D. L. Pandya, CEO & Chairman, Medical Plastics Data Service, Ahmedabad

  • Dr. Tarang Patel, Oncology Surgeon, Shery Hospital & President, National Biomedical Engineering Society, Ahmedabad

  • “Cardiology implants”: Dr. Arvind Patel, Managing Director, Sahajanand Laser Technology Ltd., Ahmedabad

        Sahjanand Laser Technology - SUSHRUTA Innovation Award (SIA):
          Paper Presentation Competition: PART-I (Approximately 6 presentations)

          LUNCH & Visit To Technology Display Show 2015

          Sahjanand Laser Technology - SUSHRUTA Innovation Award (SIA):
          Paper Presentation Competition: PART-II (Approximately 8 presentations)

 

Sahjanand Laser Technology - SUSHRUTA Innovation Award (SIA): Paper Presentation Competition

The Sahjanand Laser Technology - SUSHRUTA Innovation Award (SIA) will be held, to recognize and appreciate students with innovative ideas and concepts having wider applicability to the society for development of Medical Technology products. A jury compromising of experts in the medical device industry and medical professionals will analyze/examine the idea for scientific merit, innovation and commercialization potential.

Visit To Technology Display Show Exhibition

Technical Poster Display Opportunity For Students
Announcement of Winners
Valedictory Address

TECHNOLOGY DISPLAY SHOW 2015 EXHIBITION

An Exhibition Displaying Materials , Adhesives , New Technologies , Manufacturing / Testing Equipments , Packaging / Sterilization Equipments And Supplies For Medical Device Industry